How To Make A Desk Out Of Wood

Overview

Looking for an actress desk for the kids to do their homework on? Perhaps you're now working a day or two from dwelling house? Building one from scratch is a dandy option – and information technology's surprisingly easy to do. Here's how to build a desk-bound using materials available from Bunnings.

Tools and materials

Steps

1 Gather your tools and materials

Beneath are all of the tools and materials you'll need to complete this project.

Earmuffs, gloves, level, measuring tape, drill, drill bits, safety glasses, timber and ladder laid out on the ground.

two Measure your area

Earlier you starting time, measure out the area y'all'll be putting your desk to make sure you go the right size materials for your projection. Nosotros're using an 1800x900x33mm laminated ash panel for our tabletop, just there are a range of options in-shop. Choose 1 that suits your space.

Metal frames being used as desk legs being measured against the desk top

3 Mensurate up

Measure out on your tabletop where to position your desk legs then they're prissy and evenly spaced. Our legs are 700mm across and our laminated top is 900mm, so we'll be measuring in 100mm from each end, and 250mm from the sides.

A desk top being measured to mark out drill points for desk leg screw points

4 Mark out

In one case you've measured up, grab your pencil and mark up your side and end placement points – this volition be your guide.

A drill being used to mark holes in a flat wooden panel

5 Secure your meridian

Yous're at present ready to stand your legs upwards and drill your pilot holes ready to screw everything in. Make sure the screws you are using are not as well long – y'all don't desire these poking through the timber.

Tip: Since your tabular array is a particular thickness, information technology'south a adept idea is to identify some tape on your drill so you know not to drill by that bespeak. You don't want your drill going the whole fashion through the table!

Metal frame being screwed into the underside of a desk top

6 Drill in your screws

Once everything is in position, utilise your drill to secure the screws. Screw in the middle holes showtime to fix into position. Once y'all've done this, go back and echo steps four and 5 on the other side.

7 Lift into position

Take hold of a friend to help yous elevator your new tabular array off the sawhorses and into your new space. Now is also a good fourth dimension to catch a damp textile and give everything a quick wipe downwardly.